Printed and Machined Parts

Here you can shop for your Printed and Machined Parts or you can send us your files and ideas for fabrication.
Sort By:  
  • Prusa i3 Machined Threaded Rods Set (Prusa i3)
    S304 Stainless Steel Threaded Rod M6 + M8. Cut and Machined to specify length for Prusa i3.

    Add to Cart
    RM105.00
    RM115.00
  • Anti-backlash Nut for Tr8x8 Leadscrew (8x8)

    Tr8x8 Leadscrew Anti-backlash Nut

    This is a Pitch 2mm, 4 Starts ABN.
    So it is only compatiable with a Tr8x8 Leadscrew, the first 8 of Tr8 means it is for 8mm diameter Leadscrew and the second 8 means the Lead. 8mm Lead means when drive by a stepper driver in Full Step mode, it moves 8mm per revolution.
    Red more about leadscrew here:
    http://www.servo-drive.com/lead_screws_precize_linear_long_life_lead_screws.php

    When combined with our Tr8x8 Leadscrew Anti-backlash Nut our line of threaded shaft stepper motors provide a level of control and stability that belt systems just can not match. True, you do pay more for these motor systems but when being .01 millimeters out means total failure it is worth the price.

    Add to Cart
    RM70.00
  • J head Metal version ()
    J head Metal version
    Add to Cart
    RM193.00
  • MK7 Aluminum Thermal Core (MK7)
    MK7 Aluminum Thermal Core
    Add to Cart
    RM25.00
  • NEMA17 Threaded Rod, 350mm length Tr8x8 Acme Leadscrew (Nema17)

    Threaded Rod NEMA17 Stepper 40mm lenth, 350mm Tr8x8 Acme Leadscrew with POM Nut

    The NEMA17 Threaded Rod Stepper Motor has a precise Tr8x8 Acme Leadscrew coming out directly from the nema17 as Threaded Shaft. It's a Z axis solution

    200 steps per revolution (1.8 deg/step)

    2 Phase, Bipolar, 4 wires

    Rated Voltage 2V DC

    Rated Current 1.2A

    Phase Resistance: 1.7 Ohm ± 10% (20º C)

    Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms)

    Holding torque: 0.4 N.m Min.

    Motor length: 40mm

    Acme Lead Screw: 350mm long, Tr8x8(P2)

    Nut: POM (You could buy an extra Anti-backlash Nut)

    We can fabricate the Acme threaded rod/leadscrew to customized length for your specific applications. Also you could have other choice of motor length, diameter, pitch and length of the leadscrew/threaded shaft and a Anti-backlash Nut for this NEMA17 threaded rod nema17.

    Add to Cart
    RM280.00
  • SCS8UU Linear Slide Block (SCS8UU)
    SCS8UU Slide Unit or Linear Slide Block Bearing
    Add to Cart
    RM20.00
  • SHF8 Linear Shaft Rail Support Unit (SHF8)
    SHF8 Linear Shaft Rail Support Unit
    Add to Cart
    RM16.00
  • SK8 Linear Shaft Support Unit ()

    SK8 Linear Shaft Support Unit

    M8 Linear Shaft Mounting Support Unit.
    Add to Cart
    RM18.00
  • Threaded Rod NEMA17, 280mm Tr8x8mm Acme Leadscrew (Nema17)

    Threaded Rod Nema17 Stepper Motor

    Threaded Rod NEMA17 Stepper body 40mm lenth, 280mm Tr8*8 Leadscrew and POM Nut

    The NEMA17 Threaded Rod Stepper Motor has a precision Acme Tr8x8 Leadscrew coming out directly from the nema17 as a Threaded Shaft. It's a Z axis solution for your 3D Printers.

    200 steps per revolution (1.8 deg/step)
    2 Phase, Bipolar, 4 wires
    Rated Voltage 2V DC
    Rated Current 1.2A
    Phase Resistance: 1.7 Ohm ± 10% (20º C)
    Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms)
    Holding torque: 0.4 N.m Min.
    Motor body length: 40mm

    Acme Lead Screw: 280mm long, Tr8x8(P2)
    Nut: POM

    We can do the Acme threaded rod/leadscrew customized length for your specific applications. Also you could have other choice of motor length, diameter, pitch and length of the leadscrew/threaded shaft and a Anti-backlash Nut for this NEMA17 threaded rod linear stepper motor.

    Do you know?

    This threaded rod nema17 stepper is the most recommend product from us for the Z-axis of your 3d printer, as well this is a good choice of Z axis of cnc mill, cnc lathe machines.

    Add to Cart
    RM252.00
  • Threaded Rod Nema17 Stepper, with 460mm Tr8x12 Acme Leadscrew (Nema17)

    Threaded Rod Nema17 Stepper with Acme Leadscrew

    Tr8x12 Leadscrew, 2mm Pitch, 6 Starts. The resolution is the same with Tr8x8 Leadscrew but for much higher speed request.

    Tr8x2, Tr8x4, Tr8x8, Tr8x12 and Tr8x20 Acme Leadscrew are available
    450mm, 460mm, 470mm, 485mm and 500mm excluding the motor body can be customized.
    The lead time for 450mm and 460mm or shorter Acme Leadscrew Threaded Rod Nema17 Steppers is 10-15 days. And the the lead time for 470mm, 485mm, 500mm or longer Acme Leadscrew Threaded Rod Nema17 Stepper Motors is around one month.

    Add to Cart
    RM350.00
  • GT2 40 Tooth 6.35mm Bore Pulley (GT2)
    Timing Pulley
    Tooth Profie: GT2
    Tooth Number: 40T
    Shaft: 6.35mm Bore
    Gear Width: 6mm or 6.35mm open ended or closed-loop gt2 belt.
    Add to Cart
    RM32.00
  • GT2 Pulley 18 Tooth 6.35mm Bore (GT2)

    GT2 Pulley 18 Tooth 6.35mm Bore for Shaft of Nema23 Stepper Motor

    3dprinter.my put 20 Teeth GT2 Pulley 5mm Bore, 8mm Bore n GT2 36 Teeth Pulley 5mm Bore, 8mm Bore in stock for quick response but as you know 6.35mm Shaft is the standard diameter of a NEMA23 Stepper Motor. So we decide to bring 6.35mm Bore GT2 Pulley as stock item for makers.

    Combination:
    GT2 18 Tooth Pulley 6.35mm Bore for Motor Shaft w/ GT2 36T Pulley 5mm Bore for 5mm Smooth Rod or 8mm Bore Pulley for 8mm Smooth Rod.
    Add to Cart
    RM18.50
  • GT2 Pulley 20 Teeth 8mm Bore (GT2)

    Our GT2 pulley and belt combination provide you with much more precision and anti-backlash properties than other non round tooth profile timing pulleys. The GT2 pulley we machine can be used  with 6mm and 6.35mm width GT2 belt. It's a good choice for all kinds of machines. 3D printing is just one of these applications. These pulleys will fit 8mm smooth rod and 8mm motor shafts like those found on our NEMA23 Motors.
    GT2 pulley, 8mm bore, 20 teeth.

    This style pulley known as Ultimaker Pulley in 3d printing industry. But the true it's a universal 16 teeth or 20 teeth GT2 Pulley because the bore is large as 8mm, so you need a wider HUB than the 5mm bore pulleys.

    Add to Cart
    RM20.00
  • GT2 Pulley 40 Teeth 5mm Bore (GT2)

    GT2 Pulley 40 Teeth 5mm Bore

    Tooth Profie: GT2
    Tooth Number: 40T
    Bore Diameter: 5mm
    Gear Width: for 6mm or 6.35mm open end or closed-loop gt2 belt.
    Add to Cart
    RM30.00
  • GT2 pulley 36 teeth 8mm bore (GT2)
    The GT2 36 tooth pulley 8mm bore is for the 8mm Motor Shaft or Smooth Rod.
    It works with a 18 teeth 5mm bore GT2 pulley, you can get a 2:1 ratio for high resolution or torque increase.
    Add to Cart
    RM28.50
  • Extruder Filament Drive Gear (MK7)
    This is made of machined copper, with dimensions to better fit the 5mm shaft of the NEMA 17 used in the MK7, effective diameter of 11 mm.

    Material : Copper

    Inner diameter: 5 mm

    Outside diameter: 11 mm

    Length: 11 mm

    Fixed screw: M3

    Add to Cart
    RM40.00
  • Borosilicate Glass (MK2B)

    If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.

    Dimension: L220 x W200 x Thk 4.0mm

    Add to Cart
    RM25.00
    RM35.00
  • P8 40x40 Aluminium Extrusion Profile (P8)
    Aluminium Extrusion 40 x 40. Order can cut to specify length with some handling cost. The Minimum Order Quantity is 1.0m.

    Add to Cart
    RM70.00
    RM78.00
  • P8 60x45L Aluminium Extrusion Profile (P8)
    Aluminium Extrusion 60 x 45. Order can cut to specify length with some handling cost. The Minimum Order Quantity is 1.0m.

    Add to Cart
    RM90.00
    RM100.00
  • V625ZZ ID5 x OD16 x H5mm V Groove Sealed Ball Bearing (V625ZZ)
    5mm Bore "V" Groove Sealed Idler Pulley/Guide Rail Ball Bearing 625VV V625ZZ
    Inner Diameter(ID): 5mm
    Outer Diameter(OD): 16mm
    Thickness: 5mm
    U Groove Deepness: 0.5mm
    U Groove Width: 1.5mm
    Add to Cart
    RM15.00
Per Page      1 - 20 of 34

Powered by Abantecart eCommerce Solution