Motors

Here you can find wide selection of stepper motors, DC motors and controllers for your Reprap and other DIY hobby project needs!
Sort By:  
  • Geared Nema17 Stepper Motor (Nema17)

    Geared Nema17 Stepper Motor

    Output shaft is 8mm.
    Geared Nema17 stepper motor is good choice for the stepextruder. Neat and powerful.

    A nema17 stepper motor 34mm long body with a 5.18:1 ratio Planetary Gearbox can offer you torque output up to 1.2N.m, nearly equal to a Nema23 56mm Stepper Motor but only half the weight.
    Rated Current: 1.3A
    You also can take the Planetary Gearbox as a microstepping generator, it helps you on the result of printing.

    Add to Cart
    RM196.00
  • Huxley Threaded Rod Nema14 Stepper Motor, 180mm Tr5*2 Acme Leadscrew (Nema 14)

    Huxley Threaded Rod Nema14 Stepper Motor

    Reprap Huxley, Handy Nema14 stepper motor. Foldarap Folding 3D Printer? We recommend.
    Two Phase 4 lead wires
    200 steps per revolution (1.8 deg/step)
    Rated Current: 1.25A
    Rated Voltage: 2.3V
    Motor depth: 34mm
    M5, 5mm diameter, pitch 1mm, 2 starts Threaded Rod 180mm Acme Leadscrew

    We try to supply with integrated threaded rod nema14 for Huxley to help for the resolution and result of your 3d printing. Welcome for your pre-order.

    Add to Cart
    RM228.00
  • NEMA11 45mm long high torque stepper motor (Nema11)

    Nema 11 (28mm) 45mm Length High Torque Hybrid Stepper Motor

    Specifications:

    Holding Torque: 50mNm

    Step Angle 1.8 Deg
    Rated Current 1A per phase
    Rated Voltage 2.5V
    Inductance per Phase 1mH
    Resistance per Phase 2.5 Ohms
    Motor Length 45mm
    Insulation Resistance 100M Ohm Min. ,500VDC
    Dielectric Strength 500VAC for one minute
    Shaft Single shaft, round 5mm D
    We can produce range of nema11 stepper motors, high torque 45mm and 51mm length nema11 stepper motors.
    Add to Cart
    RM82.00
  • NEMA14 34mm 0.8A or 1.25A stepper motor (Nema14)

    Reprap Huxley, Handy Nema14 stepper motor.
    Two Phase 4 lead wires
    200 steps per revolution (1.8 deg/step)
    Option of Rated Current: 0.8A and 1.25A
    Option of Rated Voltage: 4.6V and 2.3V
    Holding torque: 15N.cm and 9N.cm
    Shaft diameter: 5mm 0.188 inch; (3/16 inch;)
    Shaft length: 22mm
    Motor depth: 34mm

    We offer NEMA14 34mm long stepper motor in two options: 0.8A, 15N.cm for low speed(we suggest under 100rpm) and 1.25A, 9N.cm for high speed(300rpm).
    0.8A nema14 34mm stepper motor has better performance in low speed and 1.25A has more torque output in high speed.

    Add to Cart
    RM53.00
  • Nema17 40mm Stepper Gearmotor (Nema17)

    Nema17 40mm Stepper Gearmotor

    Nema17 40mm Stepper Motor
    Size 36mm Gear Head 5.18:1 Gear Ratio
    Add to Cart
    RM210.00
  • Nema17 60mm 1.5A high torque stepper motor (Nema17)

    NEMA17 60mm 1.5A high torque stepper motor

    Motor Depth: 60mm, the longest body and the highest torque of nema17 stepper motor
    Two phase 4 lead wires bipolar stepper
    Step Angle: 1.8 degree, working with A4988 stepper driver, 3200pps per revolution, high resolution for 3d printers.
    Rated Current 1.5A
    Rated Voltage: 4V
    Holding Torque: 0.65N.m or 6.5Kg.cm
    Shaft: 5mm single flat, used with 5mm bore pulleys.

    The Nema17 60mm long stepper saves space and cost only half of a nema23 stepper, is a good choice for many high torque low speed applications. More powerful than the popular 2.8 V 1.68A 4.4kg.cm RepRap stepper motor. To use 24VDC power supply stepper driver, this motor will have more torque output at high speed.
    Add to Cart
    RM85.00
  • Nema23 Stepper Motor 1.3N.m High Torque with 8mm Shaft (Nema23)

    Darwin NEMA23 Stepper Motor

    Motor Depth: 56mm
    Two phase 4 lead wires bipolar stepper
    Step Angle: 1.8 degree
    Rated Current 3A
    Rated Voltage: 3.3V
    Holding Torque: 1.3N.m
    Shaft: 8mm round shaft

    To put this nema23 stepper motor here is for you to know that we can produce many kinds of stepper motor both for 3d printer(Darwin), CNC and other kinds of applications where precise control is needed.
    We can customize you with stepper motors from nema8 to nema34. Flat or Round, Single or Flat Shaft, etc.

    We do not have this nema23 stepper motor in stock. MOQ 10pcs and the lead time is 15 working days. Nema23 56mm long stepper motor is widely used in cnc machines.

    Add to Cart
    RM168.00
  • Prusa i3 Nema14 Threaded Rod Stepper Motor, 300mm M5x2 Acme Leadscrew (Nema14, Prusa i3)

    Nema14 Threaded Rod Stepper Motor for Z-axis

    Reprap Huxley, Handy Nema14 stepper motor. Foldarap Mendel Size? We recommend.
    Two Phase 4 lead wires
    200 steps per revolution (1.8 deg/step)
    Rated Current: 1.25A
    Rated Voltage: 2.3V
    Motor depth: 34mm
    M5, 5mm diameter, pitch 1mm, 2 starts Threaded Rod 300mm Acme Leadscrew

    We try to supply with integrated threaded rod Stepper Motor, M5 diameter Acme Leadscrew for Prusa i3 to help for the resolution and result of your 3d printing. 10pcs of this nema14 threaded rod stepper motor is put in production since 9th, Sept and will be finished around 8th, Oct. Welcome your pre-order.

    Add to Cart
    RM246.00
  • Prusa i3 Nema17 Threaded Rod Stepper Motor, 210mm Tr8x8 Acme Leadscrew (Nema17, Prusa i3)

    Prusa i3 Z-axis Nema17 Threaded Rod Stepper Motor

    Threaded Rod NEMA17 Stepper body 40mm lenth, 210mm Tr8x8 Leadscrew and POM Nut for Prusa i3 Z-axis

    The NEMA17 Threaded Rod Stepper Motor has a precision Acme Tr8x8 Leadscrew coming out directly from the nema17 as a Threaded Shaft. It's a Z axis solution for your 3D Printers.

    200 steps per revolution (1.8 deg/step)
    2 Phase, Bipolar, 4 wires
    Rated Voltage 2V DC
    Rated Current 1.2A
    Phase Resistance: 1.7 Ohm ± 10% (20º C)
    Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms)
    Holding torque: 0.4 N.m Min.
    Motor body length: 40mm
    Acme Lead Screw: 210mm long, Tr8x8(P2)
    Nut: POM
    We can produce the Acme threaded rod/leadscrew customized length for your specific applications. Also you could have other choice of motor length, diameter, pitch and length of the leadscrew/threaded shaft and a
    Anti-backlash Nut for this NEMA17 threaded rod linear stepper motor.

    Do you know?
    This threaded rod nema17 stepper is the most recommend product from us for the Z-axis of the Prusa i3 or Prusa Mendel, as well this is a good choice of Z axis of cnc mill, cnc lathe machines.

    Add to Cart
    RM236.00
  • 150mm Tr8x8 Acme Leadscrew Threaded Rod Nema17 Stepper Motor (Nema17)

    Nema17 Stepper Motor, body length 40mm.

    Tr8x8(pitch 2mm, 4 starts) Acme Leadscrew 150mm Long with POM Nut.

    Anti-backlash Nut can be used to avoid backlash if needed.
    Add to Cart
    RM224.00
  • NEMA17 Stepper Motor 34mm Long, 0.8A (Nema17)

    NEMA17 34mm long Stepper Motor

    Round Shaft for Ultimaker Extruder. Reprap, Makerbot and more 3D Printers
    200 steps per revolution (1.8 deg/step)

    2 Phase 4 wires
    Rated Voltage 4.83V
    Rated Current 0.84A
    Phase Resistance: 5.75 ± 10% (20º C)
    Phase inductance: 9.3 ± 20% (1kHz 1 V rms)
    Holding torque: 0.28 Min.
    Shaft diameter: 5mm 0.188" (3/16")
    Shaft length: 22mm
    Motor depth: 34mm

    The NEMA17 34mm Stepper Motor is not Stock item, the MOQ is 25pcs. We offer customized shaft and lead wires for different 3d printers.

    Option: 5mm Flat Shaft, 5mm Round Shaft.
    400mm or 700mm long lead wires.

    Do you know?
    The NEMA17 34mm Stepper Motor is recommended nema 17 stepper for extruder.

    Add to Cart
    RM50.00
  • Square flange face gearhead Nema17 40mm Stepper Gearmotor (Nema17)

    Nema17 40mm Stepper Motor

    Square flange face planetary gearhead

    Ratio near 14:1
    Add to Cart
    RM238.00
Per Page      1 - 12 of 12

Powered by Abantecart eCommerce Solution