Search

Search Criteria

     

Products meeting the search criteria

Sort By:  
  • Prusa i3 Machined Threaded Rods Set (Prusa i3)
    S304 Stainless Steel Threaded Rod M6 + M8. Cut and Machined to specify length for Prusa i3.

    Add to Cart
    RM105.00
    RM115.00
  • Prusa i3 Nema14 Threaded Rod Stepper Motor, 300mm M5x2 Acme Leadscrew (Nema14, Prusa i3)

    Nema14 Threaded Rod Stepper Motor for Z-axis

    Reprap Huxley, Handy Nema14 stepper motor. Foldarap Mendel Size? We recommend.
    Two Phase 4 lead wires
    200 steps per revolution (1.8 deg/step)
    Rated Current: 1.25A
    Rated Voltage: 2.3V
    Motor depth: 34mm
    M5, 5mm diameter, pitch 1mm, 2 starts Threaded Rod 300mm Acme Leadscrew

    We try to supply with integrated threaded rod Stepper Motor, M5 diameter Acme Leadscrew for Prusa i3 to help for the resolution and result of your 3d printing. 10pcs of this nema14 threaded rod stepper motor is put in production since 9th, Sept and will be finished around 8th, Oct. Welcome your pre-order.

    Add to Cart
    RM246.00
  • Reprap Prusa i3 Full Laser Cut Frame Kit (Prusa i3)

    Prusa i3 Full Laser Cut Frame

    You can upgrade your existing Prusa i3 build with our Full laser cut kit and all electronics parts and extruder hotend are reusable. Our Full laser cut kit are very precise and strong, you can print at higher speed with better resolution.

    Parts:

    1. Main Frame Top, Bottom, Left & Right.
    2. X Axis Idler & X Axis Motor Mount
    3. Heatbed Support with LM8UU Linear Bearing Mount Bracket
    4. Y Motor mount & Idler
    Build volumeX200 x Y180 x Z160mm
    Material: Acrylic Clear
    Thickness: 6mm


    See the printer printing in Action!
    Add to Cart
    RM850.00
  • Prusa i3 Nema17 Threaded Rod Stepper Motor, 210mm Tr8x8 Acme Leadscrew (Nema17, Prusa i3)

    Prusa i3 Z-axis Nema17 Threaded Rod Stepper Motor

    Threaded Rod NEMA17 Stepper body 40mm lenth, 210mm Tr8x8 Leadscrew and POM Nut for Prusa i3 Z-axis

    The NEMA17 Threaded Rod Stepper Motor has a precision Acme Tr8x8 Leadscrew coming out directly from the nema17 as a Threaded Shaft. It's a Z axis solution for your 3D Printers.

    200 steps per revolution (1.8 deg/step)
    2 Phase, Bipolar, 4 wires
    Rated Voltage 2V DC
    Rated Current 1.2A
    Phase Resistance: 1.7 Ohm ± 10% (20º C)
    Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms)
    Holding torque: 0.4 N.m Min.
    Motor body length: 40mm
    Acme Lead Screw: 210mm long, Tr8x8(P2)
    Nut: POM
    We can produce the Acme threaded rod/leadscrew customized length for your specific applications. Also you could have other choice of motor length, diameter, pitch and length of the leadscrew/threaded shaft and a
    Anti-backlash Nut for this NEMA17 threaded rod linear stepper motor.

    Do you know?
    This threaded rod nema17 stepper is the most recommend product from us for the Z-axis of the Prusa i3 or Prusa Mendel, as well this is a good choice of Z axis of cnc mill, cnc lathe machines.

    Add to Cart
    RM236.00
  • Reprap Prusa i3 All Laser Cut Fully Assembled & Calibrated (Prusa i3)
    This is the best 3d printer you can get in the market now. With very fine print resolution and very steady and firm Frame Assembly. Loaded with latest firmware and it prints like star ship!

    3dprinter.my i3 printer kit is an open source 3d printer kit based on prusa i3, with the Melzi/ Arduino  electronics and H-Extruer and with major improvements with High Printer Z, 160mm!

    Host software: Repetier-host or Pronterface

    Firmware: Sprinter - Melzi in the package is ready to use, you do not need to do anything to the firmware.

    Build volume: X200 x Y180 x Z160mm

    Overall size: 420x420x380mm

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB

    Motion: Linear ball bearings on X and Y and Z axes

    Pre-soldered electronics with built-in microSD card slot for standalone printing.

    Enhancements to the printed parts to improve the ease of assembly.

    Pre-order available. Delivery 1weeks.
    LCD Display and SD Card Reader - Add on Rm350.00


    See the printer printing in Action!
    See 300mm/sec Super Fast Printing Speed with High Resolution with this Printer!
    Add to Cart
    RM3,650.00
  • Prusa i3 Machined Smooth Rods Set (Prusa i3)
    S304 Stainless Steel Round Bar Diameter 8mm. Cut and Machined to specify length for Prusa i3.

    Add to Cart
    RM75.00
    RM85.00
  • Prusa i3 Printed Plastic Parts Set (Prusa i3)
    Printed Plastic Parts needed to assembled Prusa i3. Parts are printed in ABS for strong strength and durability. Whole set inclusive of endstop bracket and laser cut bracket.

    Parts in the Package:
    1. X Motor Mount x 1pc
    2. X Idler x 1pc
    3. Y Corner x 4pcs
    4. H Extruder Base x 1pc
    5. H Extruder Spring Holder x 1pc
    6. H Extruder Filament Guide x 1pc
    7. Endstop Bracket x 1pc
    8. Laser Cut Y Motor Mount Bracket x 1pc
    9. Laser Cut Y Motor Idler Bracket x 2pcs
    10. Laser Cut Extruder Mount Bracket x 2pcs

    Add to Cart
    RM320.00
    RM350.00
  • Prusa i3 Full Kit Laser Cut Acrylic Black (Prusa i3)
    Product Description 

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware

    Prusa i3 Technical Details


    Build Volume  X200mm Y200mm x Z190mm  (X8″ x Y8″ x Z7.5″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame
     5mm Acrylic Black
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion 

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit 

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous 

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM1,850.00
    RM2,100.00
  • Prusa i3 Full Kit Laser Cut Acrylic Orange (Prusa i3)
    Product Description 

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware


    Prusa i3 Technical Details

    Build Volume
     X200mm x Y200mm x Z190mm  (X8″ x Y8″ x Z7.48″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame
     6mm Acrylic Orange
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion 

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit 

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous 

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM1,900.00
    RM2,150.00
  • Prusa i3 Full Kit Laser Cut Acrylic Petronas Green (Prusa i3)
    Product Description 

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware


    Prusa i3 Technical Details

    Build Volume
     X200mm x Y200mm x Z190mm  (X8″ x Y8″ x Z7.5″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame 
    6mm Acrylic Petronas Green
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion 

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit 

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous 

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM1,900.00
    RM2,150.00
  • Prusa i3 Full Kit Laser Cut Acrylic Transparent (Prusa i3)
    Product Description 

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware


    Prusa i3 Technical Details

    Build Volume
     X200mm x Y200mm x Z190mm  (X8″ x Y8″ x Z7.5″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame 
    6mm Acrylic Transparent Clear
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion 

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit 

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous 

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM2,150.00
  • Prusa i3 Full Kit Laser Cut Acrylic White (Prusa i3)
    Product Description 

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware


    Prusa i3 Technical Details

    Build Volume
     X200mm x Y200mm x Z190mm  (X8″ x Y8″ x Z7.5″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame
     5mm Acrylic White
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion 

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit 

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous 

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM1,850.00
    RM2,100.00
  • Prusa i3 Full Kit Laser Cut Wood (Prusa i3)
    Product Description 

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware


    Prusa i3 Technical Details

    Build Volume
     X200mm x Y200mm x Z190mm  (X8″ x Y8″ x Z7.5″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame
     5mm Plywood
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion 

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit 

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous 

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM1,750.00
    RM1,950.00
  • Reprap 3D Printer Prusa i3 Fully Assembled & Calibrated (Prusa i3)
    Product Description

    The Prusa i3 (iteration 3) is the newest and current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs. Compared to its predecessors and other RepRap machines, Prusa i3 is known for its extreme ease of assembling, reliable printing, and dual extruder option. This printer uses laser-cut acrylic sheets to improve stability.

    Prusa i3 Build Documents 

    Click here for Prusa i3 build manual by 3printer.my
    Click here for Prusa i3 STL files
    Click here for Prusa i3 RAMPS
    Click here for Prusa ALC i3 Firmware


    Prusa i3 Technical Details

    Build Volume
     X200mm x Y200mm x Z190mm  (X8″ x Y8″ x Z7.5″)
    Overall size 420x420x380mm
    Control Board RAMPS 1.4 Electronics
    Frame
    6mm Acrylic Sheets
    Hotend 0.4mm J-head MK IV
    50 micron Layer Height achievable
    MK2A Heated Build Platform
    GT2 Pulley’s and Belts
    12V 30A Power Supply
    H Extruder


    Included in our Prusa i3 Package 

    MK2A Heated Built Platform (wires and LED pre-soldered)
    Nema 17 Stepper Motors x 5 (connectors and pins also included)
    12V 30A Power Supply
    RAMPS 1.4 Shield
    Mega 2560 R3 Control Board
    Pololu Stepper Driver x 4 (with heat sinks)

    Prusa i3 Linear Motion

    GT2 20-Tooth Aluminum Pulleys x 2
    GT2 Timing Belt 1.9m
    Hardened Stainless Steel Precision Rods
    LM8UU Bearings x 10

    Prusa i3 Tool Kit

    3m Measuring Tape
    Allen Wrench Set
    14mm Wrench
    Circular File
    Needle-nose Pliers

    Miscellaneous

    4mm x 210mm x 200mm Borosilicate Glass plate
    MKIV J-head hotend (3.0mm with 0.4mm orifice)

    Host software: Pronterface

    Firmware: Marlin - RAMPS in the package is ready to use, you do not need to do anything to the firmware

    Printing materials: ABS, PLA, 3mm or 1.75mm diameter thermoplastic.

    Build surface: PCB-heated bed to reduce complexity of assembly and to ensure parts do not warp.

    Computer interface: USB


    1st & 2nd batch of Fully Assembled & Calibrated WLC i3 (10units) all sold out and supported by us during installation easily. All the 10 units out in our client hands are able to give very fine print of single layer wall 0.5mm up to 190mm high! All of 10units 3d printer are able to print within 1st hour out from the box without any problem!

    Thanks to all your support!

    Now we are launching the 3rd batch of Fully Assembled & Calibrated LC i3. So grab yours today to avoid any waiting!
    Add to Cart
    RM2,450.00
    RM2,650.00
Per Page      1 - 14 of 14

Powered by Abantecart eCommerce Solution