Extruder and Hot Ends

Over here you can shop all for your 3D Printer's Extruder and Hot Ends needs!
Sort By:  
  • J head Metal version ()
    J head Metal version
    Add to Cart
    RM193.00
  • K-type Thermocouple for Reprap Hot End (K)
    K-type Thermocouple a good replacement for the NTC Thermistor.

    Extension Wire: 1M
    Head: Stainless Steel OD4×L30mm
    Add to Cart
    RM35.00
  • MK8 0.4mm Copper Nozzle (MK8)
    Makerbot Replicator 1 & 2 Replacement MK8 0.4mm Nozzle 3D Printer HotEnd Hot End

    This Mk8 Nozzle is a drop in replacements of OEM Makerbot Mk8 nozzle. Our nozzles machined per Makerbot CAD files. Nozzles are engraved to designate extrusion channel diameter.

    Mk8 nozzle represent improvement over previously used Mk7 nozzle. Difference between MK7 and MK8 is described ia quote from Makerbot website:


        MK7 v. MK8 The main difference between the MK8 Stepstruder and the MK7 is the ratio of melted to unmelted plastic inside the heated nozzle. You don't want PLA to stay melted for too long, because it will start to degrade, but the new design should eliminate that problem. About the same amount of plastic fits into each nozzle, but in the MK8 nozzle, more of that plastic remains solid. That means that any given bit of PLA will spend less time sitting in the heated nozzle in it's liquid state, and won’t have much time to degrade.
    Add to Cart
    RM45.00
  • Extruder Filament Drive Gear (MK7)
    This is made of machined copper, with dimensions to better fit the 5mm shaft of the NEMA 17 used in the MK7, effective diameter of 11 mm.

    Material : Copper

    Inner diameter: 5 mm

    Outside diameter: 11 mm

    Length: 11 mm

    Fixed screw: M3

    Add to Cart
    RM40.00
  • Assembled J-Head MK-V Hot End 0.4mm Nozzle, 3mm filament ABS PLA,Reprap (MKV)
    Items Description
    Features
    Nozzle: 0.4mm

    with 75cm cables

    For 3mm filament
    Package List
    1 x Assembled J-Head Hot End
    Add to Cart
    RM150.00
    RM180.00
  • Hardened M8 Hobbed Bolts for Wade extruders (wade extruder)
    This M8 Hobbed bolt is used to push the filament into the nozzle and has very great driving force. The bolt is an overall length of 60mm, 55 mm from the bottom of the head to the end of the threads. The hobbed part of the bolt is 25mm from the center of the hobbed part to the bottom of the head. Silver color (zinc plated class 10.9)

    "made in Malaysia"
    Add to Cart
    RM25.50
    RM32.00
  • M8 Hobbed Bolts for Wade extruders (wade extruder)
    This M8 Hobbed bolt is used to push the filament into the nozzle and has very great driving force. The bolt is an overall length of 60mm, 55 mm from the bottom of the head to the end of the threads. The hobbed part of the bolt is 25mm from the center of the hobbed part to the bottom of the head. Silver color (zinc plated class 10.9)

    "made in Malaysia"
    Add to Cart
    RM22.50
    RM29.00
  • PC 04-1/8 Pneumatic Connector for Bowden Extruder (PC04-1/8)

    PC4-M6 Pneumatic Connector for Bowden Extruder

    Pneumatic connectors for bowden extruder, 1.75 mm filament.
    The connector need to fit in the Single/Dual Extruder Bar Mount Chassis Block on one side, to connect the PTFE tube and the Thermal Barrier Tube on the other side.

    Add to Cart
    RM7.50
    RM8.50
  • PC 06-1/8 Pneumatic Connector for Bowden Extruder (PC06-1/8)

    PC06-1/8 Pneumatic Connector for Bowden Extruder

    Pneumatic connectors for bowden extruder, 3.0 mm filament.
    The connector need to fit in the Single/Dual Extruder Bar Mount Chassis Block on one side, to connect the PTFE tube and the Thermal Barrier Tube on the other side.

    Add to Cart
    RM8.50
    RM9.50
  • 12V 40W Reprap Cartridge Heater (12V40W)
    Cartridge Heater

    Wires: 1 Meter

    Heater element: 6*20mm

    12V 40Watt

    The 12V 40W 6*20mm Cartridge Heater is a very suitable power and size for the 3d printer extruders like the  MK7, etc, 1 meter long wire leads make connecting our heater quick and easy.
    Our Heater Cartridge is the best way to heat up your Reprap extruder hot end up faster and more consistently. It's also a much cleaner look than power resistors. Don't forget to pick up the rest of your hot end parts while you are here. It's best to pick up a few things to take advantage of our lower shipping rates for larger orders.
    Add to Cart
    RM40.00
  • J Head MK-V Hot End (J Head MKV)
    Reliable Improved version J Head Hot End

    This hot end has been redesign for all parts to be able to be dismantle and service. It is make in our workshop, so quality and reliability is being assured by us. You can be rest assure of buying it as a replacement for your existing 3d printer or for your new build. Dealer enquiry are welcome for quantity purchase.

    Nozzle Ø: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm.
    Filament Ø: 1.75mm, 3.0mm  ABS & PLA
    Add to Cart
    RM100.00
    RM110.00
  • Extruder Springs ()
    Description:

     

    This is a set of two springs for your extruder on many types of 3D printers, Reprap, Prusa Mendel etc. With very high spring tension thus they are perfect for the job.

     

    Specification:

    OD : Φ8mm
    Wire diameter : 1.21mm
    Total Coils : 10
    Free Length : 25mm

     

    Package list:
    2 x Spring for
    Extruder

    Add to Cart
    RM13.50
    RM15.00
  • 12VDC 4CM Cooling Fan ()

    12VDC 4CM Cooling Fan

    Size: 40x40x10mm
    Main Material: Plastic
    Rated Voltage: 12V
    Maximum speed: 4000rpm
    Maximum air flow: 2.9CFM
    Noise: 20db
    Weight: 14.1g
    Fan Frame: injection molding, PBT +30% glass line + V0 class flame retardant
    Blades: injection molding, PBT +30% glass line + V0 class flame retardant
    Bearing: Sleeve Bearing
    Blow Direction: Axial
    Operating voltage range: +/-15%, or special specifications
    Life: 30000 hrs.

    Board interface cable length 250MM

    Add to Cart
    RM15.50
    RM20.00
  • Blower Fan 12V 50mm for 3D Prints Cooling ()

    Blower Fan for Cooling the Prints

    12V 0.06A
    50mm*15mm Blowing Fan/Radial Fan for 3D Printer
    This fan helps to cool the prints out.

    Add to Cart
    RM18.00
    RM25.00
  • 12VDC 4CM 4010 Cooling Fan ()

    12VDC 4CM Cooling Fan

    Size: 40x40x10mm
    Main Material: Plastic
    Rated Voltage: 12Vdc
    Operating Current: 0.90A +/-10%

    Maximum speed: 7,500rpm
    Maximum air flow: 8.5CFM
    Noise: 25db
    Weight: 16g
    Fan Frame: injection molding, PBT +30% glass line + V0 class flame retardant
    Blades: injection molding, PBT +30% glass line + V0 class flame retardant
    Bearing: Sleeve Bearing
    Blow Direction: Axial
    Operating voltage range: +/-15%, or special specifications
    Life: 30000 hrs.

    Board interface cable length 130MM

    Add to Cart
    RM19.50
    RM25.00
  • 12VDC 4CM 4010 Cooling Fan ()

    12VDC 4CM Cooling Fan

    Size: 40x40x10mm
    Main Material: Plastic
    Rated Voltage: 12Vdc
    Maximum speed: 5,500rpm
    Maximum air flow: 6.3CFM
    Noise: 25db
    Weight: 14.1g
    Fan Frame: injection molding, PBT +30% glass line + V0 class flame retardant
    Blades: injection molding, PBT +30% glass line + V0 class flame retardant
    Bearing: Sleeve Bearing
    Blow Direction: Axial
    Operating voltage range: +/-15%, or special specifications
    Life: 30000 hrs.

    Board interface cable length 130MM

    Add to Cart
    RM18.50
    RM23.00
  • PTFE Tube ID2 x OD3mm (PTFE)
    PTFE Tube ID2.0 x OD3.0mm. Suitable for 1.75mm Filament. Order can cut to specify length with some handling cost. The Minimum Order Quantity is 1.0 feet (30.0 cm).

    PTFE Tubing Offers:

    • Non-stick properties
    • Temperature resistance up to 260º C (500º F)
    • Aging resistance
    • Can be steam or chemically sterilized in-line
    • Superior chemical resistivity and low coefficient of friction

    Add to Cart
    RM15.00
    RM18.00
  • PTFE Tube ID4 x OD6mm (PTFE)
    PTFE Tube ID4.0 x OD6.0mm. Suitable for 3.0mm Filament. Order can cut to specify length with some handling cost. The Minimum Order Quantity is 1.0 feet (30.0 cm).

    PTFE Tubing Offers:

    • Non-stick properties
    • Temperature resistance up to 260º C (500º F)
    • Aging resistance
    • Can be steam or chemically sterilized in-line
    • Superior chemical resistivity and low coefficient of friction

    Add to Cart
    RM17.00
    RM18.00
  • 3.0mm Filament Drive Gear (MK7)
    This is made of machined Brass, with dimensions to better fit the 5 mm shaft of the NEMA 17 used in the MK7, effective diameter of  9.5 mm.

    "made in Malaysia"
    Add to Cart
    RM35.00
  • 1.75mm Filament Drive Gear ()
    Made of machined Brass, with dimensions to better fit the 5 mm shaft of the NEMA 17 Stepper Motor.

    "made in Malaysia"
    Add to Cart
    RM38.00
Per Page      1 - 20 of 23

Powered by Abantecart eCommerce Solution