DC Motors and Controller

Here you can find wide selection of DC motors and controllers for your Reprap and others project needs!
Sort By:  
  • Miniature DC Motor PPN13 (PPN13)

    Specifications:

    Made by PANASONIC

    Standard Input Voltage 3.5~7.5Vdc
    Motor Diameter 15.2mm
    Motor Length 27mm

    Axes Diameter 1.5mm Length 9.5mm



    DC Motor PPN13 Spec

    Add to Cart
    RM8.00
  • Miniature DC Motor PWN10 (PWN10)

    Specifications:

    Made by PANASONIC

    Standard Input Voltage 5~10.0Vdc
    Motor Diameter 15.2mm
    Motor Length 27mm

    Axes Diameter 1.5mm Length 9.5mm



    DC Motor PWN10 Spec

    Add to Cart
    RM10.00
  • MABUCHI 755 DC motor, high speed aviation model 755 (755)
    MABUCHI 755 DC motor, high speed aviation model 755

    Motor enameled wire with high strength, high current carbon brushes, metal end caps, gale leaves large thermal windows with magnetic shield, cover the body with a laser typing. Fit for power tools, drill & screw driver, office automation
     equipment, air pump & oil pump, power tools, etc.


    3.0Vdc    4700 rpm     1.70A
    6.0Vdc    9400 rpm     1.90A
    9.0Vdc    14500 rpm   2.20A
    12.0Vdc  20000 rpm   2.70A
    15.0Vdc  25100 rpm   3.00A
    18.0Vdc  30400 rpm   3.75A

     
    Dimensions approximately: Diameter 44.4MM, length 60MM, shaft diameter 5MM, shaft length 17.5MM, weight approx. 320g


    Spec Sheet of Motor
    Add to Cart
    RM45.00
  • LM2596S-ADJ DC-DC adjustable step-down module IN3-40V OUT1.5-35V (LM2596S)



    LM2596S-ADJ DC-DC adjustable step-down module In3-40Vdc Out1.5-35Vdc

     

    Note that the input and output can not be reversed . Reverse may cost damage to circuit !



    Input : DC 3V to 40V

    Output : DC 1.5V to 35V voltage is continuously adjustable , high efficiency maximum output current of 3A.

    Features : All solid capacitors using SANYO , 36u thick circuit boards, high-Quality inductors with high- output LED indicators

    DC-DC 45 ( L) * 20 ( W ) * 14 ( H) mm 

    Note: long working hours is recommended for use in less than 2.5A current , while adding a heat sink (10W output above ) ;
    As the buck module , in order to ensure stable output , keep a minimum 1.5V differential .

    The voltage regulator
    Access to power (3-40V), adjust the blue potentiometer knob ( clockwise general boost, buck counter-clockwise ) and use a multimeter to monitor the output voltage reaches the needed voltage.

    Wiring
    1 welding, soldering directly to the power line at the input ( output ) port ;
    2 solder pins, the pins can be inserted through a lead or plug in the hole using the board ; soldered directly to the PCB or add pin after another .

    Application examples
    1 vehicle power supply , simply enter the module powered cigarette holder termination point on the car , you can adjust the potentiometer , the output voltage can be adjusted in 1.25-30V , for your phone , MP3, MP4, PSP and other charge many devices powered, very simple and convenient .

    2 to the power electronic device , when the device requires 3-35V supply voltage of the power supply while the corresponding hands , you can easily use this module to the required voltage of the voltage and solve problems.

    3 Operating voltage test system , you can use this module to do the project when debugging a variety of voltage test system operating voltage range , very easy and convenient

    Add to Cart
    RM12.50
    RM15.00
  • KDL 24V DC motor (KDL 24V)
    KDL 24V DC Motor

    Motor enameled wire with high strength, high current carbon brushes, metal end caps, gale leaves large thermal windows with magnetic shield, cover the body with a laser typing. Fit for power tools, drill & screw driver, office automation
     equipment, air pump & oil pump, power tools, etc.


    Operating Voltage: 6 to 24Vdc
    Off-Load Amp: 0.3Amp
    Off-Load RPM: 1000-4000rpm
    Shaft: D Type
    Overall Length: 106mm
    Weight: 808g

     

    Add to Cart
    RM95.00
    RM120.00
  • 12Vdc Gear Motor High Torque 3Kg-7Kg 70-RPM ()
    12Vdc Gear Motor High Torque 3Kg-7Kg 70-RPM

    Operating voltage: 12Vdc
    Off-load speed: 70-RPM
    Torque: 3Kg-7Kg
    Overall Length: 110mm
    Weight: 327g
    Shaft: D type
    Feature: Metal Gear Reducer Motor (low noise)
    Application: Boat, Car, Electric Bicycle, Home Appliance, Robot, School project..


    Add to Cart
    RM55.00
Per Page      1 - 6 of 6

Powered by Abantecart eCommerce Solution