Download software for your Reprap 3d Printer

Reprap Prusa Mendel Software Downloads

Below is the list of the software we recommend using with your Prusa Mendel 3D Printer . We have provided download links to our hosted versions (tested with our printers and a confirmed 100% working).

We have also provided the software developer links to the the latest versions, however we recommend using our currently tested configuration, at least in the 1st place, until your up and running and comfortable with the software.
Please Note the files directly linked on this page are 32bit versions, if you are running a 64bit version of windows, you will need to download the 64bit version for your architecture from the respective developer links. (ie X86_64, AMD64 etc)
Printer Control Software
Arduino Development Environment V0.22
Used for uploading firmware to the RAMPS 1.4 Board.
Our tested Application Version : Arduino-0022 (116602) .
Developer link : Arduino.
Arduino
Arduino Development Environment V1.0
Contains the required Driver for communicating with the Ardunio & RAMPS Board.
Our tested Application Version : Arduino-1.0-windows (148150).
Developer link : Ardunio.
Arduino
Python
Python 2.72
The python environment required for the printer control software (Print Run/Pronterface)
Our tested Application Version : Python-2.7.2 (34390).
Developer link : Python.
Python
PYSerial
Python Dependencies for serial communication.
Our tested Application Version : Pyserial-2.5.win32 (4345).
Developer link : Python Dependencies.
Python
Python 2.8
Our tested Application Version : WxPython2.8-win32-unicode-2.8.12.0-py27 (23827).
Developer link : Python 2.8 on Sourceforge.
Python
PYReadline
Python Dependencies for serial communication.
Our tested Application Version : Pyreadline-1.7.win32 (4073).
Developer link : PYReadline on Launchpad.
Python
Pyglet
Our tested Application Version : Pyglet-1.1.4 (7714).
Developer link : Pyglet on Google Code.
Ponterface/ Print Run by Kliment
The main application for controlling the 3D printer which controls Skienforge (below)
Our tested Application Version : Kliment-Printrun-d9a3363 (31232).
Developer link : Pronterface/Printrun.
Python
Skienforge by fabmetheus
This is the component that runs within Proterface/Print Run(above) that generates the G Code, from your 3D model to tell the printer how to print.
Our tested Application Version : Romscraj-Skeinforge41-097bc3e (7533).
Developer link : Skienforge.
Skeinforge
Prusa Mendel RAMPS Firmware
Sprinter Firmware
This the build of the SPRINTER Firmware that we use with our Prusa Mendel 3D Printer Kits
Our build of SPRINTER : Sprinter (3758).
Developer link : Kliment’s SPRINER.
Sprinter
Marlin Firmware
This is an alternative firmware that adds various functionalities, such as “look ahead”, dynamic bed positioning and more functions related to temperature control, it’s still a Beta Version, so be careful.
Our build of MARLIN : Marlin (4000).
Developer link : Erik Zalm’s MARLIN .
Marlin
CAM/ CAD 3D Modelling Software
Google Sketchup
Used for creating and modifying 3D digital models.
Our tested Application Version : GoogleSketchUpWEN (66498).
Developer link : Google Sketchup.
Netfabb Studio Basic
Used for file conversion from Google Sketchup into .STL files, repairing and scaling of your 3D models/designs
Our tested Application Version : NetfabbInstaller Offline.
Developer link : Netfabb.
All the supplied programs and files are free software: you can redistribute them and/or modify them under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. These programs are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with the software.
OpenSCAD
OpenSCAD is a software for creating solid 3D CAD objects.
It is free software and available for Linux/UNIX, MS Windows and Mac OS X.
Our tested Application Version : OpenSCAD 2014.03 Windows.
Developer link : OpenSCAD.
Repetier-Host
The Repetier-Host is a simple to use host software, which is be compatible with most firmwares around. You can add and position your STL files on the simulated printbed and slice them all together. For slicing you can use the built-in Slic3r slicer or use the well-known Skeinforge.
Our tested Application Version : Repetier-Host Windows 0.90C.
Developer link : Repetier-Host.
Marlin Firmware - 3dprinter.my Acrylic Laser Cut (ALC)
This is the build of the Marlin Firmware that we use with our Prusa ALC i3.
Our build of MARLIN : 3dprinter.my ALC i3 Marlin.
Marlin